# PUT /api/merchants/{id}/processor-profiles/{profileId}

Processor Profile: replaces an existing processor profile.

A full replace of that single profile. An active profile must declare at least one payment type.

**Operation ID:** `merchantProcessorProfileUpdateProcessorProfile`

## Authorization

Requires: Merchants.Merchants.Update, merchant scope.

Required permissions:
- `Merchants.Merchants.Update`

## Parameters

| Name | In | Required | Type | Description |
| --- | --- | --- | --- | --- |
| id | path | yes | string(uuid) | The merchant id. |
| profileId | path | yes | string(uuid) | The processor profile id (authoritative; any id on the body is ignored). |
| If-Match | header | no | string | The merchant's concurrency stamp, read from the `If-Match` header. When supplied and stale  the write is rejected with 409; when omitted, no concurrency check is performed. |
| suppressNulls | query | no | boolean | If true, omit properties with null values. |

## Request Body

The new profile content. Omitted fields are cleared (PUT replace semantics).

**Content type:** `application/json`

Schema: `ProcessorProfileDto`

Properties:
- `processorProfileId` (string(uuid)): Gets or sets the unique identifier of this processor profile.
- `merchantId` (string(uuid)): Corresponding merchant id
- `paymentTypes` (array<ProcessorProfilePaymentType>): Payment types turned on for this profile.
- `isActive` (boolean): Shows if the current profile is active or not.
- `enabledTenders` (object): Per-tender enable flags applied by the capability cascade at the  processor-account layer. `null` indicates "all disabled" for legacy  profiles that have never opted in to a non-credit tender.
- `merchantProcessorConfiguration` (object): Corresponding configuration holding the details of the processor.
- `merchantConcurrencyStamp` (string): The merchant's concurrency stamp after the write that returned this profile, or  `null` on a read.
- `datawireRegistration` (object): What automatic Datawire registration did during the write that returned this profile. Absent  when it did not run (any non-Fiserv profile, a Fiserv profile that already carries a Datawire  ID, and every read).
- `webhookRegistrationToken` (string): The token in this profile's webhook registration URL, for a processor whose provider sends  webhooks to a URL registered per merchant. Absent for every other processor.

**Content type:** `text/json`

Schema: `ProcessorProfileDto`

Properties:
- `processorProfileId` (string(uuid)): Gets or sets the unique identifier of this processor profile.
- `merchantId` (string(uuid)): Corresponding merchant id
- `paymentTypes` (array<ProcessorProfilePaymentType>): Payment types turned on for this profile.
- `isActive` (boolean): Shows if the current profile is active or not.
- `enabledTenders` (object): Per-tender enable flags applied by the capability cascade at the  processor-account layer. `null` indicates "all disabled" for legacy  profiles that have never opted in to a non-credit tender.
- `merchantProcessorConfiguration` (object): Corresponding configuration holding the details of the processor.
- `merchantConcurrencyStamp` (string): The merchant's concurrency stamp after the write that returned this profile, or  `null` on a read.
- `datawireRegistration` (object): What automatic Datawire registration did during the write that returned this profile. Absent  when it did not run (any non-Fiserv profile, a Fiserv profile that already carries a Datawire  ID, and every read).
- `webhookRegistrationToken` (string): The token in this profile's webhook registration URL, for a processor whose provider sends  webhooks to a URL registered per merchant. Absent for every other processor.

**Content type:** `application/*+json`

Schema: `ProcessorProfileDto`

Properties:
- `processorProfileId` (string(uuid)): Gets or sets the unique identifier of this processor profile.
- `merchantId` (string(uuid)): Corresponding merchant id
- `paymentTypes` (array<ProcessorProfilePaymentType>): Payment types turned on for this profile.
- `isActive` (boolean): Shows if the current profile is active or not.
- `enabledTenders` (object): Per-tender enable flags applied by the capability cascade at the  processor-account layer. `null` indicates "all disabled" for legacy  profiles that have never opted in to a non-credit tender.
- `merchantProcessorConfiguration` (object): Corresponding configuration holding the details of the processor.
- `merchantConcurrencyStamp` (string): The merchant's concurrency stamp after the write that returned this profile, or  `null` on a read.
- `datawireRegistration` (object): What automatic Datawire registration did during the write that returned this profile. Absent  when it did not run (any non-Fiserv profile, a Fiserv profile that already carries a Datawire  ID, and every read).
- `webhookRegistrationToken` (string): The token in this profile's webhook registration URL, for a processor whose provider sends  webhooks to a URL registered per merchant. Absent for every other processor.

## Responses

### 200

OK

**Content type:** `application/json`

Schema: `ProcessorProfileDto`

Properties:
- `processorProfileId` (string(uuid)): Gets or sets the unique identifier of this processor profile.
- `merchantId` (string(uuid)): Corresponding merchant id
- `paymentTypes` (array<ProcessorProfilePaymentType>): Payment types turned on for this profile.
- `isActive` (boolean): Shows if the current profile is active or not.
- `enabledTenders` (object): Per-tender enable flags applied by the capability cascade at the  processor-account layer. `null` indicates "all disabled" for legacy  profiles that have never opted in to a non-credit tender.
- `merchantProcessorConfiguration` (object): Corresponding configuration holding the details of the processor.
- `merchantConcurrencyStamp` (string): The merchant's concurrency stamp after the write that returned this profile, or  `null` on a read.
- `datawireRegistration` (object): What automatic Datawire registration did during the write that returned this profile. Absent  when it did not run (any non-Fiserv profile, a Fiserv profile that already carries a Datawire  ID, and every read).
- `webhookRegistrationToken` (string): The token in this profile's webhook registration URL, for a processor whose provider sends  webhooks to a URL registered per merchant. Absent for every other processor.

### 403

Forbidden

**Content type:** `application/json`

Schema: `RemoteServiceErrorResponse`

Properties:
- `error` (RemoteServiceErrorInfo)

### 401

Unauthorized

**Content type:** `application/json`

Schema: `RemoteServiceErrorResponse`

Properties:
- `error` (RemoteServiceErrorInfo)

### 400

Bad Request

**Content type:** `application/json`

Schema: `RemoteServiceErrorResponse`

Properties:
- `error` (RemoteServiceErrorInfo)

### 404

Not Found

**Content type:** `application/json`

Schema: `RemoteServiceErrorResponse`

Properties:
- `error` (RemoteServiceErrorInfo)

### 501

Not Implemented

**Content type:** `application/json`

Schema: `RemoteServiceErrorResponse`

Properties:
- `error` (RemoteServiceErrorInfo)

### 500

Internal Server Error

**Content type:** `application/json`

Schema: `RemoteServiceErrorResponse`

Properties:
- `error` (RemoteServiceErrorInfo)

### default

The request failed. The body carries the standard error envelope: a machine-readable `error.code`, a human-readable `error.message`, and `error.validationErrors` when the failure was a validation rejection. See the error-code reference in this document's description for the values `error.code` can take.

**Content type:** `application/json`

Schema: `RemoteServiceErrorResponse`

Properties:
- `error` (RemoteServiceErrorInfo)

### 429

The request was refused because a rate limit was exceeded, or because something a later retry can clear stopped it. A rate limit refusal carries an `application/problem+json` body: wait at least the interval `Retry-After` names before retrying, then back off. Limits are tuned per deployment, so read the allowance from the response headers rather than assuming a fixed ceiling. Any other refusal carries the standard error envelope as `application/json`, and its `error.code` names the cause.

**Content type:** `application/problem+json`

Schema: `RateLimitProblemDetails`

Properties:
- `type` (string) required: The problem type identifier. Always the same value: the failure is the status code itself,  so there is no sub-type for a caller to branch on.
- `title` (string) required: A short, human-readable summary of the problem type.
- `status` (integer(int32)) required: The HTTP status code, repeated in the body as the problem-details format defines.
- `detail` (string) required: A human-readable explanation of this occurrence of the problem.
- `retryAfterSeconds` (integer(int32)) required: How long to wait before retrying, in whole seconds, carrying the same figure as the  `Retry-After` header. Always at least one: a value of zero would invite an immediate  retry that is certain to be rejected again.

**Content type:** `application/json`

Schema: `RemoteServiceErrorResponse`

Properties:
- `error` (RemoteServiceErrorInfo)

## Example request

Every block below sends the same request. Replace {{BASE_URL}} with the address of the API you are calling and {{API_KEY}} with your own key.

The request body is a ProcessorProfileDto. See the Request body section below for its fields.

### cURL

```bash
curl -X PUT "{{BASE_URL}}/api/merchants/{id}/processor-profiles/{profileId}" \
  -H "api-key: {{API_KEY}}" \
  -H "Content-Type: application/json" \
  -d '{
  "processorProfileId": "3fa85f64-5717-4562-b3fc-2c963f66afa6",
  "merchantId": "3fa85f64-5717-4562-b3fc-2c963f66afa6",
  "paymentTypes": [
    {
      "id": "3fa85f64-5717-4562-b3fc-2c963f66afa6",
      "name": ""
    }
  ],
  "isActive": false,
  "enabledTenders": {},
  "merchantProcessorConfiguration": {},
  "merchantConcurrencyStamp": "",
  "datawireRegistration": {},
  "webhookRegistrationToken": ""
}'
```

### PowerShell

```powershell
$headers = @{
    'api-key' = '{{API_KEY}}'
}

$body = @'
{
  "processorProfileId": "3fa85f64-5717-4562-b3fc-2c963f66afa6",
  "merchantId": "3fa85f64-5717-4562-b3fc-2c963f66afa6",
  "paymentTypes": [
    {
      "id": "3fa85f64-5717-4562-b3fc-2c963f66afa6",
      "name": ""
    }
  ],
  "isActive": false,
  "enabledTenders": {},
  "merchantProcessorConfiguration": {},
  "merchantConcurrencyStamp": "",
  "datawireRegistration": {},
  "webhookRegistrationToken": ""
}
'@

$response = Invoke-RestMethod -Method PUT -Uri '{{BASE_URL}}/api/merchants/{id}/processor-profiles/{profileId}' `
    -Headers $headers -ContentType 'application/json' -Body $body
```

### TypeScript (SDK)

```bash
npm install @winkpg/winkpg-api
```

```typescript
import { Configuration, MerchantsApi } from '@winkpg/winkpg-api';

const api = new MerchantsApi(new Configuration({
  basePath: '{{BASE_URL}}',
  apiKey: '{{API_KEY}}',
}));

const { data } = await api.merchantProcessorProfileUpdateProcessorProfile("3fa85f64-5717-4562-b3fc-2c963f66afa6", "3fa85f64-5717-4562-b3fc-2c963f66afa6", {
  "processorProfileId": "3fa85f64-5717-4562-b3fc-2c963f66afa6",
  "merchantId": "3fa85f64-5717-4562-b3fc-2c963f66afa6",
  "paymentTypes": [
    {
      "id": "3fa85f64-5717-4562-b3fc-2c963f66afa6",
      "name": ""
    }
  ],
  "isActive": false,
  "enabledTenders": {},
  "merchantProcessorConfiguration": {},
  "merchantConcurrencyStamp": "",
  "datawireRegistration": {},
  "webhookRegistrationToken": ""
});
```

### TypeScript (raw HTTP)

```typescript
const response = await fetch('{{BASE_URL}}/api/merchants/{id}/processor-profiles/{profileId}', {
  method: 'PUT',
  headers: {
    "api-key": "{{API_KEY}}",
    "Content-Type": "application/json",
  },
  body: JSON.stringify({
    "processorProfileId": "3fa85f64-5717-4562-b3fc-2c963f66afa6",
    "merchantId": "3fa85f64-5717-4562-b3fc-2c963f66afa6",
    "paymentTypes": [
      {
        "id": "3fa85f64-5717-4562-b3fc-2c963f66afa6",
        "name": ""
      }
    ],
    "isActive": false,
    "enabledTenders": {},
    "merchantProcessorConfiguration": {},
    "merchantConcurrencyStamp": "",
    "datawireRegistration": {},
    "webhookRegistrationToken": ""
  }),
});

const data = await response.json();
```

### C# (SDK)

```bash
dotnet add package WinkPg.Api.Client
```

```csharp
using WinkPg.Api.Client.Api;
using WinkPg.Api.Client.Client;
using System.Text.Json;

var config = new Configuration { BasePath = "{{BASE_URL}}" };
config.AddApiKey("api-key", "{{API_KEY}}");

var api = new MerchantsApi(config);
var body = JsonSerializer.Deserialize<ProcessorProfileDto>("""
    {
      "processorProfileId": "3fa85f64-5717-4562-b3fc-2c963f66afa6",
      "merchantId": "3fa85f64-5717-4562-b3fc-2c963f66afa6",
      "paymentTypes": [
        {
          "id": "3fa85f64-5717-4562-b3fc-2c963f66afa6",
          "name": ""
        }
      ],
      "isActive": false,
      "enabledTenders": {},
      "merchantProcessorConfiguration": {},
      "merchantConcurrencyStamp": "",
      "datawireRegistration": {},
      "webhookRegistrationToken": ""
    }
    """);

var result = await api.MerchantProcessorProfileUpdateProcessorProfileAsync(Guid.Parse("3fa85f64-5717-4562-b3fc-2c963f66afa6"), Guid.Parse("3fa85f64-5717-4562-b3fc-2c963f66afa6"), body);
```

### C# (raw HTTP)

```csharp
using System.Text;

using var http = new HttpClient { BaseAddress = new Uri("{{BASE_URL}}") };

var request = new HttpRequestMessage(new HttpMethod("PUT"), "/api/merchants/{id}/processor-profiles/{profileId}");
request.Headers.Add("api-key", "{{API_KEY}}");

request.Content = new StringContent("""
    {
      "processorProfileId": "3fa85f64-5717-4562-b3fc-2c963f66afa6",
      "merchantId": "3fa85f64-5717-4562-b3fc-2c963f66afa6",
      "paymentTypes": [
        {
          "id": "3fa85f64-5717-4562-b3fc-2c963f66afa6",
          "name": ""
        }
      ],
      "isActive": false,
      "enabledTenders": {},
      "merchantProcessorConfiguration": {},
      "merchantConcurrencyStamp": "",
      "datawireRegistration": {},
      "webhookRegistrationToken": ""
    }
    """, Encoding.UTF8, "application/json");

var response = await http.SendAsync(request);
response.EnsureSuccessStatusCode();
var json = await response.Content.ReadAsStringAsync();
```

### Python (SDK)

```bash
pip install winkpg-api
```

```python
import winkpg_api

configuration = winkpg_api.Configuration(host="{{BASE_URL}}")
configuration.api_key["ApiKey"] = "{{API_KEY}}"

with winkpg_api.ApiClient(configuration) as client:
    api = winkpg_api.MerchantsApi(client)
    body = winkpg_api.ProcessorProfileDto.from_dict({
      "processorProfileId": "3fa85f64-5717-4562-b3fc-2c963f66afa6",
      "merchantId": "3fa85f64-5717-4562-b3fc-2c963f66afa6",
      "paymentTypes": [
        {
          "id": "3fa85f64-5717-4562-b3fc-2c963f66afa6",
          "name": ""
        }
      ],
      "isActive": False,
      "enabledTenders": {},
      "merchantProcessorConfiguration": {},
      "merchantConcurrencyStamp": "",
      "datawireRegistration": {},
      "webhookRegistrationToken": ""
    })
    result = api.merchant_processor_profile_update_processor_profile("3fa85f64-5717-4562-b3fc-2c963f66afa6", "3fa85f64-5717-4562-b3fc-2c963f66afa6", body)
```

### Python (raw HTTP)

```bash
pip install requests
```

```python
import requests

headers = {
    "api-key": "{{API_KEY}}",
    "Content-Type": "application/json",
}

body = {
  "processorProfileId": "3fa85f64-5717-4562-b3fc-2c963f66afa6",
  "merchantId": "3fa85f64-5717-4562-b3fc-2c963f66afa6",
  "paymentTypes": [
    {
      "id": "3fa85f64-5717-4562-b3fc-2c963f66afa6",
      "name": ""
    }
  ],
  "isActive": False,
  "enabledTenders": {},
  "merchantProcessorConfiguration": {},
  "merchantConcurrencyStamp": "",
  "datawireRegistration": {},
  "webhookRegistrationToken": ""
}

response = requests.request(
    "PUT",
    "{{BASE_URL}}/api/merchants/{id}/processor-profiles/{profileId}",
    headers=headers,
    json=body,
)
response.raise_for_status()
data = response.json()
```

## See also

- [All documentation](https://devportal-simpay-sbx.winkpg.io/llms.txt): the machine-readable index of every public page on this site.