# GET /api/app/security-overview/merchant-posture

**Required permissions**: `AbpIdentity.Users`  
**Scope**: host

**Operation ID:** `securityOverviewGetMerchantPosture`

## Authorization

Requires: AbpIdentity.Users, host scope.

Required permissions:
- `AbpIdentity.Users`

## Parameters

| Name | In | Required | Type | Description |
| --- | --- | --- | --- | --- |
| MerchantId | query | no | string(uuid) |  |
| suppressNulls | query | no | boolean | If true, omit properties with null values. |

## Responses

### 200

OK

**Content type:** `application/json`

Schema: `MerchantSecurityPostureDto`

Properties:
- `merchantId` (string(uuid)): The merchant the counts cover, when they cover exactly one.
- `isTenantWide` (boolean): Whether the counts cover every account and key in the tenant, which only an administrator  reaches.
- `scopedMerchantCount` (integer(int32)): How many merchants the counts cover. Zero alongside `isTenantWide` being  `false` means the caller can act for no merchant, so there was nothing to count.
- `userCount` (integer(int32)): Accounts in scope among those the scan examined.
- `usersWithMfa` (integer(int32)): Accounts with a second factor enrolled.
- `usersWithStalePassword` (integer(int32)): Accounts whose password is older than `stalePasswordThresholdDays`, or that have  no recorded change at all.
- `stalePasswordThresholdDays` (integer(int32)): The age at which a password counts as stale here. Follows the tenant's own rotation period  when rotation is enforced, and otherwise falls back to a fixed default so the column still  means something for a tenant that has not set a policy.
- `userCountTruncated` (boolean): Whether the account scan reached its limit, in which case accounts in scope may never have  been examined and every account count here is a floor rather than a total.
- `apiKeyCount` (integer(int32)): API keys in scope. A total unless `apiKeyCountTruncated` is set.
- `dormantApiKeys` (integer(int32)): Keys with no recorded use for longer than `dormantApiKeyThresholdDays`. A key  that has never been used is measured from its creation, so one minted this morning is not  reported as dormant.
- `dormantApiKeyThresholdDays` (integer(int32)): The idle age at which a key counts as dormant.
- `apiKeysWithoutSourceRestriction` (integer(int32)): Keys not bound to any source address, and so usable from anywhere.
- `apiKeyCountTruncated` (boolean): Whether more keys are in scope than the scan examined. Unlike the account scan this one is  narrowed store-side, so the keys counted are all in scope and only the bound was reached.

### 403

Forbidden

**Content type:** `application/json`

Schema: `RemoteServiceErrorResponse`

Properties:
- `error` (RemoteServiceErrorInfo)

### 401

Unauthorized

**Content type:** `application/json`

Schema: `RemoteServiceErrorResponse`

Properties:
- `error` (RemoteServiceErrorInfo)

### 400

Bad Request

**Content type:** `application/json`

Schema: `RemoteServiceErrorResponse`

Properties:
- `error` (RemoteServiceErrorInfo)

### 404

Not Found

**Content type:** `application/json`

Schema: `RemoteServiceErrorResponse`

Properties:
- `error` (RemoteServiceErrorInfo)

### 501

Not Implemented

**Content type:** `application/json`

Schema: `RemoteServiceErrorResponse`

Properties:
- `error` (RemoteServiceErrorInfo)

### 500

Internal Server Error

**Content type:** `application/json`

Schema: `RemoteServiceErrorResponse`

Properties:
- `error` (RemoteServiceErrorInfo)

### default

The request failed. The body carries the standard error envelope: a machine-readable `error.code`, a human-readable `error.message`, and `error.validationErrors` when the failure was a validation rejection. See the error-code reference in this document's description for the values `error.code` can take.

**Content type:** `application/json`

Schema: `RemoteServiceErrorResponse`

Properties:
- `error` (RemoteServiceErrorInfo)

### 429

The request was refused because a rate limit was exceeded, or because something a later retry can clear stopped it. A rate limit refusal carries an `application/problem+json` body: wait at least the interval `Retry-After` names before retrying, then back off. Limits are tuned per deployment, so read the allowance from the response headers rather than assuming a fixed ceiling. Any other refusal carries the standard error envelope as `application/json`, and its `error.code` names the cause.

**Content type:** `application/problem+json`

Schema: `RateLimitProblemDetails`

Properties:
- `type` (string) required: The problem type identifier. Always the same value: the failure is the status code itself,  so there is no sub-type for a caller to branch on.
- `title` (string) required: A short, human-readable summary of the problem type.
- `status` (integer(int32)) required: The HTTP status code, repeated in the body as the problem-details format defines.
- `detail` (string) required: A human-readable explanation of this occurrence of the problem.
- `retryAfterSeconds` (integer(int32)) required: How long to wait before retrying, in whole seconds, carrying the same figure as the  `Retry-After` header. Always at least one: a value of zero would invite an immediate  retry that is certain to be rejected again.

**Content type:** `application/json`

Schema: `RemoteServiceErrorResponse`

Properties:
- `error` (RemoteServiceErrorInfo)

## Example request

Every block below sends the same request. Replace {{BASE_URL}} with the address of the API you are calling and {{API_KEY}} with your own key.

### cURL

```bash
curl -X GET "{{BASE_URL}}/api/app/security-overview/merchant-posture" \
  -H "api-key: {{API_KEY}}"
```

### PowerShell

```powershell
$headers = @{
    'api-key' = '{{API_KEY}}'
}

$response = Invoke-RestMethod -Method GET -Uri '{{BASE_URL}}/api/app/security-overview/merchant-posture' `
    -Headers $headers
```

### TypeScript (SDK)

```bash
npm install @winkpg/winkpg-api
```

```typescript
import { Configuration, SecurityOverviewApi } from '@winkpg/winkpg-api';

const api = new SecurityOverviewApi(new Configuration({
  basePath: '{{BASE_URL}}',
  apiKey: '{{API_KEY}}',
}));

const { data } = await api.securityOverviewGetMerchantPosture();
```

### TypeScript (raw HTTP)

```typescript
const response = await fetch('{{BASE_URL}}/api/app/security-overview/merchant-posture', {
  method: 'GET',
  headers: {
    "api-key": "{{API_KEY}}",
  },
});

const data = await response.json();
```

### C# (SDK)

```bash
dotnet add package WinkPg.Api.Client
```

```csharp
using WinkPg.Api.Client.Api;
using WinkPg.Api.Client.Client;

var config = new Configuration { BasePath = "{{BASE_URL}}" };
config.AddApiKey("api-key", "{{API_KEY}}");

var api = new SecurityOverviewApi(config);
var result = await api.SecurityOverviewGetMerchantPostureAsync();
```

### C# (raw HTTP)

```csharp
using var http = new HttpClient { BaseAddress = new Uri("{{BASE_URL}}") };

var request = new HttpRequestMessage(new HttpMethod("GET"), "/api/app/security-overview/merchant-posture");
request.Headers.Add("api-key", "{{API_KEY}}");

var response = await http.SendAsync(request);
response.EnsureSuccessStatusCode();
var json = await response.Content.ReadAsStringAsync();
```

### Python (SDK)

```bash
pip install winkpg-api
```

```python
import winkpg_api

configuration = winkpg_api.Configuration(host="{{BASE_URL}}")
configuration.api_key["ApiKey"] = "{{API_KEY}}"

with winkpg_api.ApiClient(configuration) as client:
    api = winkpg_api.SecurityOverviewApi(client)
    result = api.security_overview_get_merchant_posture()
```

### Python (raw HTTP)

```bash
pip install requests
```

```python
import requests

headers = {
    "api-key": "{{API_KEY}}",
}

response = requests.request(
    "GET",
    "{{BASE_URL}}/api/app/security-overview/merchant-posture",
    headers=headers,
)
response.raise_for_status()
data = response.json()
```

## See also

- [All documentation](https://devportal-simpay-sbx.winkpg.io/llms.txt): the machine-readable index of every public page on this site.